Renovating your kitchen is usually a daunting job, particularly in terms of eradicating giant home equipment like wall microwaves. These models are sometimes heavy and might be troublesome to maneuver, to not point out {the electrical} wiring and security hazards concerned. Nonetheless, with the suitable instruments and a bit know-how, you possibly can safely and effectively take away a wall microwave and clear the best way for a recent new look.
Earlier than you begin, be sure to have the mandatory instruments available. You will want a screwdriver, a drill, a pair of pliers, and a ladder or step stool. If the microwave is wired instantly into the wall, you might also want a voltage tester and wire cutters. After getting your instruments assembled, it is time to get began. First, flip off the facility to the microwave on the circuit breaker or fuse field. This may forestall any electrical shocks or accidents in the course of the elimination course of.
Subsequent, take away the screws that maintain the microwave in place. These screws are sometimes situated on the highest and backside of the unit. As soon as the screws are eliminated, rigorously elevate the microwave off the wall and set it apart. Watch out to not drop or injury the unit. If the microwave is wired instantly into the wall, you’ll need to disconnect the wires earlier than you possibly can take away it utterly. Use a voltage tester to ensure the wires will not be dwell earlier than touching them. As soon as the wires are disconnected, you possibly can safely take away the microwave from the wall.
Security Precautions
Common Pointers
* At all times disconnect the microwave from {the electrical} outlet earlier than trying any repairs or changes.
* By no means function the microwave with the door open or broken. This will trigger dangerous radiation and electrical shock.
* Keep away from touching the metallic casing or inside elements of the microwave, as they could be scorching.
* Permit the microwave to chill utterly earlier than trying to take away it from the wall.
* Use correct lifting strategies to keep away from damage. If the microwave is especially heavy, it is strongly recommended to hunt help from one other individual.
Particular Precautions for Over-the-Vary Microwaves
* Concentrate on any supporting brackets or screws which may be holding the microwave in place. These ought to be eliminated rigorously to forestall injury to the equipment or the wall.
* If the microwave is vented to the surface, be certain that the vent hose is disconnected and sealed correctly.
* Verify for any wires or cables which may be linked to the microwave. These ought to be rigorously indifferent and labeled for simple reattachment later.
Further Suggestions
* It’s useful to have a second individual current to help with the elimination course of, particularly if the microwave is giant or heavy.
* Use a flashlight or headlamp to light up the work space, particularly if the work is being executed in a confined house.
* Take your time and be affected person. Eradicating a wall microwave might be difficult, however with correct precautions and cautious execution, it may be executed safely and successfully.
Gathering Mandatory Instruments
Security Gear
Earlier than commencing any work, guarantee your security. Put on protecting gloves, security glasses, and a mud masks to forestall damage from sharp edges or particles.
Important Instruments
- Cordless drill or screwdriver
- Drill bits or screw bits
- Stud finder
- Stage
- Socket wrench or adjustable wrench
Optionally available Instruments
Relying on the precise microwave set up, you might also want the next instruments:
| Device | Goal |
|---|---|
| Wire cutters | For reducing electrical wires |
| Voltage tester | To make sure electrical security |
| Caulk gun and caulk | For sealing gaps across the microwave |
| Utility knife | For reducing insulation or wires |
Really useful Supplies
Along with instruments, you might also want the next supplies:
- New screws or bolts (if crucial)
- Electrical tape
- Electrical wire nuts
- Mounting bracket (if the prevailing one is broken)
Disconnecting the Energy Provide
To disconnect the facility provide to your wall microwave, comply with these steps:
1. Flip off the circuit breaker or fuse
Find {the electrical} panel on your residence and establish the circuit breaker or fuse that controls the facility to the microwave. Flip off the breaker or take away the fuse.
2. Unplug the microwave
Disconnect the microwave’s energy wire from {the electrical} outlet.
3. Take away the mounting bolts
Most wall microwaves are mounted to a wall bracket utilizing two or 4 bolts. These bolts are sometimes situated on the prime and backside of the microwave. Use a wrench or socket to take away the bolts, however watch out to not drop the microwave.
If the bolts are troublesome to take away, chances are you’ll want to make use of a penetrating lubricant or apply downward stress to the microwave whereas unscrewing the bolts.
As soon as the bolts are eliminated, the microwave might be rigorously lifted off the wall bracket.
Eradicating the Mounting Bracket
After getting disconnected the facility and eliminated the trim equipment, you possibly can start eradicating the mounting bracket. Here is an in depth step-by-step information:
- Find the Mounting Screws: Sometimes, the mounting bracket is secured to the wall with two or 4 screws. Search for them on the highest and/or backside of the bracket.
- Take away the Screws: Utilizing a screwdriver or drill, rigorously take away the screws. Make certain to carry the microwave regular as you do that.
- Raise the Microwave Off the Bracket: With the screws eliminated, gently elevate the microwave straight as much as detach it from the bracket. Be cautious to not let it swing or drop.
- Disconnect the Wiring from the Bracket: Typically, there can be a wiring harness connecting the microwave to the bracket. Disconnect this harness by urgent the discharge tab or unscrewing the connector. Notice the situation of the wires for reassembly.
| Necessary Security Notice: |
|---|
| At all times disconnect the facility provide earlier than eradicating the mounting bracket to forestall electrical shock or different hazards. |
Detaching the Microwave from the Wall
As soon as you have disconnected the microwave from the facility provide, it is time to detach it from the wall. This course of will range relying on the kind of mounting bracket used. Listed below are the final steps for every sort:
| Mounting Bracket Sort | Detachment Steps |
|---|---|
| French Cleat |
Gently elevate the microwave straight as much as disengage it from the cleat on the wall. Don’t pull the microwave ahead or backward, as this might injury the cleat or the microwave. |
| Bracket with Screws |
Use a screwdriver or drill to take away the screws that safe the microwave to the bracket. As soon as the screws are eliminated, rigorously elevate the microwave off the bracket. |
| Wall-Mounted Cupboard |
If the microwave is mounted inside a wall-mounted cupboard, you’ll need to take away the cupboard from the wall earlier than you possibly can detach the microwave. |
As soon as the microwave is indifferent from the wall, rigorously elevate it down and place it on a steady floor. You should definitely assist the underside of the microwave with one hand whereas lifting it with the opposite.
Decreasing the Microwave Rigorously
After getting disconnected the microwave from the facility supply and eliminated the mounting bracket, it is time to rigorously decrease the microwave from the wall.
1. Get Assist
For bigger microwaves, enlist the assistance of a good friend or member of the family to help you in decreasing it.
2. Maintain the Microwave Securely
Place your self in entrance of the microwave and grasp it firmly with each fingers. Be certain that your grip is safe and balanced.
3. Decrease Slowly and Gently
Rigorously decrease the microwave in direction of the ground, sustaining a gentle and managed movement. Don’t drop or jolt the microwave at any time.
4. Assist the Microwave
In case you are unable to decrease the microwave utterly to the ground, place a sturdy field or desk beneath it to assist its weight.
5. Clear the Manner
Earlier than decreasing the microwave, be certain that the trail to the ground is obvious of any obstacles or tripping hazards.
6. Tilt and Take away
If the microwave is near the ground however not fairly touching it, rigorously tilt it ahead and pull it away from the wall. This step requires further care to forestall any injury or damage.
| Step | Description |
|---|---|
| 1 | Flip off breaker |
| 2 | Take away faceplate |
| 3 | Unscrew mounting bracket |
| 4 | Disconnect wiring |
| 5 | Decrease microwave |
| 6 | Tilt and take away |
Eradicating the Again Cowl
Earlier than you begin, collect your instruments and supplies. You will want a Phillips head screwdriver, a flathead screwdriver, and a pair of needle-nose pliers. You may additionally want a flashlight that can assist you see contained in the microwave.
After getting your instruments and supplies, comply with these steps to take away the again cowl of your microwave:
1. Unplug the microwave from the wall outlet.
2. Take away the screws which can be holding the again cowl in place. These screws are sometimes situated on the highest and backside of the again cowl.
3. Rigorously elevate the again cowl off the microwave. Watch out to not injury the wires or different elements contained in the microwave.
4. Set the again cowl apart in a protected place.
| High 5 Microwave Manufacturers | Market Share |
|---|---|
| Samsung | 25% |
| LG | 20% |
| Whirlpool | 15% |
| GE | 12% |
| KitchenAid | 10% |
5. Examine the within of the microwave for any injury. If you happen to see any injury, don’t use the microwave. Contact a professional restore technician instantly.
6. If the within of the microwave seems okay, you possibly can proceed with the subsequent step.
7. Find the capacitor. The capacitor is a big, cylindrical element that’s sometimes situated on the left facet of the microwave. It’s often lined by a plastic or metallic casing.
8. Rigorously discharge the capacitor. To do that, use a pair of needle-nose pliers to the touch the 2 terminals on the capacitor. You will note a spark when the capacitor discharges.
Disconnecting Inside Wires
7. Establish and Disconnect the Energy Wire: Find the thick, insulated wire linked to the circuit breaker. That is the facility wire. Grip the wire with insulated pliers and pull it straight out of the terminal block.
8. Disconnect the Different Wires: Across the energy wire, you may discover smaller wires of various colours. These are the bottom, impartial, and management wires. Observe these steps to disconnect them:
- Impartial Wire (White): Grip the white wire with pliers and pull it straight out of the impartial terminal block.
- Floor Wire (Inexperienced or Naked Copper): Grip the inexperienced or naked copper wire with pliers and pull it straight out of the bottom terminal block.
- Management Wires: These wires are often black, purple, or yellow. They connect with the management panel of the microwave. Establish the terminal blocks the place they join and pull every wire straight out.
9. Wrap and Safe the Wires: As soon as all of the wires are disconnected, wrap them along with electrical tape to forestall any electrical shorts. Safe the wires out of the best way utilizing zip ties or wire clips.
| Wire Sort | Terminal Block Colour |
|---|---|
| Energy | Pink/Black |
| Impartial | White |
| Floor | Inexperienced/Naked Copper |
| Management | Varies (Black, Pink, Yellow) |
Eradicating the Magnetron and Transformer
9. Disconnecting the Electrical Connections
As soon as the magnetron and transformer are uncovered, you may must disconnect {the electrical} connections. These connections will range relying on the precise mannequin of microwave you have got, however they will sometimes contain a couple of screws or terminals.
To disconnect {the electrical} connections, comply with these steps:
- Establish {the electrical} connections on the magnetron and transformer.
- Use a screwdriver to take away the screws or terminals that safe the connections.
- Gently pull the wires away from the magnetron and transformer. Watch out to not injury the wires.
As soon as {the electrical} connections are disconnected, you possibly can take away the magnetron and transformer from the microwave.
| Sort of Connection | How one can Disconnect |
|---|---|
| Screw terminal | Use a screwdriver to take away the screw. |
| Push-on terminal | Gently pull the wire away from the terminal. |
| Soldered connection | Use a soldering iron to soften the solder and disconnect the wires. |
Disconnect the Microwave
Earlier than you start, disconnect the microwave from the facility outlet. This may forestall any electrical shocks or injury to the microwave.
Take away the Mounting Screws
Find the screws that mount the microwave to the wall. These are sometimes situated on the highest and backside of the microwave. Take away the screws utilizing a screwdriver.
Raise the Microwave
Grip the microwave firmly on each side. Raise the microwave straight up and off the wall. Watch out to not injury the wall or the microwave.
Decrease the Microwave
Decrease the microwave to a desk or countertop. Don’t drop the microwave, as this might injury it.
Clear the Wall
Use a humid material to wash the wall the place the microwave was mounted. This may take away any mud or particles that will have amassed.
Clear the Microwave
Clear the microwave completely earlier than utilizing it once more. This may take away any meals residue or grease that will have amassed.
Safely Disposing of the Microwave
Verify Native Rules
Verify together with your native waste administration authority for directions on find out how to eliminate a microwave oven. Some localities have particular necessities for the disposal of digital waste.
Contact a Recycling Heart
Contact an area recycling middle to see in the event that they settle for microwaves. Some recycling facilities specialize within the recycling of digital waste.
Contact the Producer
Contact the producer of your microwave to see if they’ve any recycling or disposal applications. Some producers provide applications for the protected disposal of their merchandise.
Use a Waste Disposal Service
Contact a waste disposal service that makes a speciality of the disposal of digital waste. These providers will sometimes cost a charge for his or her providers.
| Disposal Methodology | Execs | Cons |
|---|---|---|
| Native waste administration authority | Usually free | Could have particular necessities |
| Recycling middle | Recycles supplies | Could not settle for all microwaves |
| Producer | Could have recycling applications | Is probably not handy |
| Waste disposal service | Handy | Sometimes fees a charge |
How one can Take away a Wall Microwave
To take away a wall microwave, comply with these steps:
1.
Flip off the facility to the microwave on the circuit breaker.
2.
Open the microwave door and take away the turntable and some other detachable elements.
3.
Find the screws which can be holding the microwave to the wall and take away them.
4.
Rigorously pull the microwave away from the wall, being cautious to not injury {the electrical} wire.
5.
Disconnect {the electrical} wire from the wall outlet.
6.
Take away the microwave from the mounting bracket.
Individuals Additionally Ask
How do I take away a microwave that’s constructed into a cupboard?
To take away a microwave that’s constructed into a cupboard, comply with these steps:
1.
Open the microwave door and take away the turntable and some other detachable elements.
2.
Find the screws which can be holding the microwave to the cupboard and take away them.
3.
Rigorously pull the microwave away from the cupboard, being cautious to not injury {the electrical} wire.
4.
Disconnect {the electrical} wire from the wall outlet.
5.
Take away the microwave from the mounting bracket.
How do I take away a microwave that’s hanging on a bracket?
To take away a microwave that’s hanging on a bracket, comply with these steps:
1.
Flip off the facility to the microwave on the circuit breaker.
2.
Open the microwave door and take away the turntable and some other detachable elements.
3.
Find the screws which can be holding the microwave to the bracket and take away them.
4.
Rigorously pull the microwave away from the bracket, being cautious to not injury {the electrical} wire.
5.
Disconnect {the electrical} wire from the wall outlet.
6.
Take away the microwave from the wall.
