Whether or not you are upgrading your graphics card or troubleshooting an issue, figuring out easy methods to take away it safely and effectively is important. Graphic playing cards are delicate parts, so it is vital to take care when dealing with them. On this information, we’ll stroll you thru the step-by-step strategy of eradicating a graphics card out of your pc, guaranteeing that you simply do it with out inflicting any injury.
Earlier than you start, energy down your pc and unplug it from the facility outlet. This can forestall any electrical shocks or injury to the parts. Subsequent, open your pc case and find the graphics card. It is going to usually be put in in a PCI Specific (PCIe) slot on the motherboard. As soon as you have discovered the graphics card, you may have to launch the retaining clip that holds it in place. The clip is often situated on the finish of the PCIe slot, and it may be launched by urgent down on it or sliding it to the aspect.
As soon as the retaining clip is launched, you’ll be able to rigorously pull the graphics card straight up and out of the PCIe slot. Remember to assist the cardboard together with your different hand to forestall it from bending or breaking. If the cardboard is caught, don’t pressure it. As a substitute, verify to make it possible for all the retaining clips are launched and that there aren’t any cables or different obstructions stopping the cardboard from being eliminated. With the graphics card eliminated, now you can proceed together with your improve or troubleshooting.
Eradicating the Screws
The subsequent step in eradicating your graphics card is to find and take away the screws which might be holding it in place. These screws are usually situated on the again of the cardboard, close to the I/O panel. They’re often small, Phillips-head screws, however they might range relying on the make and mannequin of your graphics card. To take away the screws, you will have a small Phillips-head screwdriver.
After you have situated the screws, rigorously unscrew them. Remember to assist the graphics card together with your different hand as you do that, in order that it doesn’t fall out of the slot. As soon as the screws are eliminated, you’ll be able to gently pull the graphics card straight out of the PCIe slot. Watch out to not bend or injury the cardboard as you do that.
| Screw Location | Screw Sort | Screwdriver Required |
|---|---|---|
| Again of the graphics card, close to the I/O panel | Phillips-head screw | Phillips-head screwdriver |
Further suggestions for eradicating the screws:
- In case you are having bother eradicating the screws, strive utilizing a magnetic screwdriver. This can assist to maintain the screws from falling out as you unscrew them.
- Watch out to not overtighten the screws if you reinstall the graphics card. This could injury the cardboard or the motherboard.
- When you lose any of the screws, you’ll be able to often discover replacements at your native ironmongery store.
Pulling the Card Out
As soon as the cardboard is unlocked, you’ll be able to rigorously pull it out of the motherboard slot. To do that, grasp the cardboard by the highest and backside edges and gently rock it backwards and forwards till it comes free. Don’t pull on the cardboard by the wires or connectors, as this might injury them.
As soon as the cardboard is free, raise it straight up and out of the slot. Watch out to not bend or injury the cardboard as you take away it.
Listed below are some extra suggestions for pulling the cardboard out:
- If the cardboard is caught, don’t pressure it. Gently rock it backwards and forwards till it comes free.
- Don’t contact the gold contacts on the cardboard.
- In case you are having bother eradicating the cardboard, you should use a small flat-head screwdriver to softly pry it out of the slot.
As soon as the cardboard is eliminated, you’ll be able to retailer it in an anti-static bag till you might be prepared to put in it in one other pc.
Cleansing the Slot
As soon as you have eliminated your graphics card, it is a good suggestion to scrub the slot it was put in in. Over time, mud and particles can construct up within the slot, which may trigger issues with the connection between your graphics card and your motherboard. To wash the slot, use a gentle, dry fabric or a compressed air can. Watch out to not injury the slot or its parts.
If the slot is especially soiled, chances are you’ll want to make use of a cotton swab dipped in isopropyl alcohol to scrub it. Remember to let the alcohol dry utterly earlier than reinserting your graphics card.
Further Ideas for Cleansing the Slot
- Use a flashlight to examine the slot for any particles or injury.
- When you’re utilizing a compressed air can, maintain it upright and spray in brief bursts. Keep away from spraying straight into the slot.
- When you’re utilizing a cotton swab dipped in isopropyl alcohol, make sure you wring out the swab earlier than inserting it into the slot.
- Let the alcohol dry utterly earlier than reinserting your graphics card.
How To Take away Graphic Card
Earlier than you start, energy down your pc and unplug it from the facility outlet. You will additionally have to discharge any static electrical energy by touching a steel object like a doorknob or radiator.
Subsequent, find the graphics card. It is going to often be the biggest card in your pc, and it’ll have various ports on the again for connecting displays. As soon as you have discovered the graphics card, you can begin eradicating it.
To take away the graphics card, first take away the screws which might be holding it in place. There’ll often be two or three screws, situated on the again of the pc. As soon as the screws are eliminated, you’ll be able to gently pull the graphics card straight out of the slot.
If the graphics card is caught, chances are you’ll want to make use of a screwdriver to softly pry it free. Watch out to not injury the graphics card or the motherboard.
As soon as the graphics card is eliminated, you’ll be able to disconnect the facility cables from the again of the cardboard. There’ll often be one or two energy cables, relying on the kind of graphics card.
Now you’ll be able to set up your new graphics card. To do that, merely insert the brand new card into the slot on the motherboard and tighten the screws. Then, join the facility cables to the again of the cardboard. Lastly, energy in your pc and set up the drivers to your new graphics card.
