Are you uninterested in having to change between the bathe and bathtub manually? A diverter valve may also help! This useful machine permits you to simply change the movement of water from the showerhead to the bathtub spout, and vice versa. Putting in a diverter valve is a comparatively easy challenge that may be accomplished in a number of hours. This is a step-by-step information that will help you get began.
Earlier than you start, you will want to assemble a number of instruments and supplies. You will want a diverter valve (accessible at most {hardware} shops), a wrench, a screwdriver, and a few Teflon tape. After getting all the things you want, you can begin the set up course of. Step one is to close off the water provide to your bathe. Subsequent, take away the showerhead by unscrewing it from the bathe arm. As soon as the showerhead is eliminated, you will must take away the previous diverter valve. To do that, merely unscrew the valve from the bathe arm. Now, you are prepared to put in the brand new diverter valve. Begin by wrapping the threads of the valve with Teflon tape, then screw the valve onto the bathe arm.
As soon as the diverter valve is put in, you possibly can reattach the showerhead. Activate the water provide to your bathe, and verify for leaks. If there aren’t any leaks, you are all set! Now you can benefit from the comfort of a diverter valve in your bathe.
Putting in the New Diverter Valve
1. Take away the Previous Diverter Valve
Find the screws holding the previous diverter valve in place and take away them. Gently pull the valve away from the pipe, taking care to not harm the threads.
2. Examine the Threads
Examine the threads on the pipe and the brand new diverter valve. Be certain that they’re clear and freed from particles. If mandatory, use a thread cleaner to take away any burrs or corrosion.
3. Apply Sealant
Apply a skinny layer of sealant to the threads of the brand new diverter valve. It will assist create a watertight seal.
4. Set up the Diverter Valve
Thread the brand new diverter valve onto the pipe by hand, making certain it’s aligned appropriately. Tighten it additional utilizing a wrench, being cautious to not overtighten.
5. Set up the Deal with
Find the deal with on the brand new diverter valve and align it with the slot on the valve physique. Slide the deal with onto the valve and safe it by tightening the screw.
6. Reattach the Escutcheon
Take the escutcheon (the ornamental plate surrounding the valve) and align it over the valve physique. Safe it by tightening the screws. Be certain that the escutcheon suits snugly towards the wall.
Extra Particulars for Step 6:
– If the escutcheon doesn’t match flush towards the wall, chances are you’ll want to make use of a spacer or washer to create a greater match.
– When tightening the escutcheon screws, keep away from overtightening, as this will harm the plate or the wall.
– If the escutcheon has a number of screws, tighten them in a star sample to make sure even stress distribution.
– As soon as the escutcheon is safe, verify for any gaps or leaks across the edge. If mandatory, apply extra sealant to seal any leaks.
Testing the Diverter Valve for Leaks
As soon as the diverter valve is put in, it is vital to check it for leaks. It will make sure that the valve is functioning correctly and that there aren’t any water leaks.
To check the diverter valve for leaks, comply with these steps:
1. Activate the water provide to the bathe or tub.
2. Open the bathe or tub faucet and let the water run for a couple of minutes.
3. Examine for any leaks across the diverter valve. If there are any leaks, tighten the packing nut or exchange the O-ring.
4. Repeat steps 1-3 for the bathtub spout.
5. Flip off the water provide to the bathe or tub.
6. Examine for any leaks across the diverter valve. If there are any leaks, tighten the packing nut or exchange the O-ring.
7. If there aren’t any leaks, the diverter valve is put in and functioning correctly.
8. If you’re nonetheless experiencing leaks after following these steps, there could also be an issue with the diverter valve itself. On this case, you’ll need to interchange the diverter valve.
| Leak Location | Potential Trigger | Resolution |
|---|---|---|
| Across the diverter valve deal with | Free packing nut | Tighten the packing nut |
| Across the diverter valve physique | Broken O-ring | Change the O-ring |
| Across the bathe or tub spout | Free connection | Tighten the connection |
The right way to Match a Diverter Valve
A diverter valve is a plumbing fixture that permits you to management the movement of water between two totally different shops. This may be helpful for quite a lot of functions, reminiscent of diverting water from a showerhead to a bath spout, or from a kitchen sink to a dishwasher. Diverter valves are comparatively simple to put in, and might be accomplished in a number of easy steps.
Step 1: Collect your supplies.
You will have the next supplies to put in a diverter valve:
- Diverter valve
- Wrench
- Plumber’s tape
- Screwdriver
Step 2: Flip off the water provide.
Earlier than you start engaged on the diverter valve, you will need to flip off the water provide to the fixture. This may be accomplished by turning off the principle water valve in your house, or by turning off the person water valve for the fixture.
Step 3: Take away the previous diverter valve.
As soon as the water provide is turned off, you possibly can take away the previous diverter valve. To do that, merely use a wrench to unscrew the nuts that maintain the valve in place. As soon as the nuts are unfastened, you possibly can pull the valve off of the pipe.
Step 4: Set up the brand new diverter valve.
To put in the brand new diverter valve, merely reverse the steps that you just used to take away the previous valve. First, apply a small quantity of plumber’s tape to the threads of the valve. Then, screw the valve onto the pipe. Lastly, tighten the nuts that maintain the valve in place.
Step 5: Activate the water provide.
As soon as the diverter valve is put in, you possibly can activate the water provide. Examine for leaks across the valve, and tighten the nuts as mandatory.
Step 6: Check the diverter valve.
To check the diverter valve, merely activate the water and verify to make it possible for the water is flowing to the proper outlet. If the water will not be flowing to the proper outlet, chances are you’ll want to regulate the place of the valve.
Individuals Additionally Ask
How do I do know if I want a diverter valve?
Chances are you’ll want a diverter valve if you wish to management the movement of water between two totally different shops. For instance, chances are you’ll want a diverter valve if you wish to divert water from a showerhead to a bath spout, or from a kitchen sink to a dishwasher.
What are the several types of diverter valves?
There are two foremost varieties of diverter valves: push-pull diverter valves and lever diverter valves. Push-pull diverter valves are operated by pushing or pulling on a knob, whereas lever diverter valves are operated by transferring a lever up or down.
How do I select the fitting diverter valve?
When selecting a diverter valve, it’s good to think about the next components:
- The kind of fixture you might be putting in the valve on
- The variety of shops you need to management
- The movement price of the water
- The model of the valve
- The worth of the valve
